Technical

HOME | Guide | Technical

Handles mounting instructions

 
Back to Back Pair
Single Bolt Through
Single Face Fix
▶︎ Lever Handles

How to maintain

 

【Attention】

1. Handles may get a bit wet with everyday use. To dry it simply wipe it with a cloth. And if by any chance the handles become shaky, you just have to tighten the screws.
2. When the surface appears a bit dry, use a cotton cloth and gently coat the handle with oil without it to become sticky. We advise you to do this several times a year.
3. After many years of use, the color will get deeper but if you prefer the original one, polish the handle with #240 sandpaper and finish with coating it with a cotton cloth and oil, you shall then get back to the previous color.

*If there are any points you do not understand concerning the maintenance, send us a picture of your handles and will shall give you advises depending on their condition. info@aru-japan.com
*The handles' gloss is also kept by their regular and gentle use.

 

【Maintenance necessary tools】

1. High range vegetable clear oil made in Germany
2. Cotton cloth
3. #240 Sandpape
 
 

【Process】

1. Prepare in advance the door handles, the clear oil, the cotton cloth, and the #240 sandpaper.

木製ドアハンドル_メンテナンス_写真1 すがたかたち

 
2. Verify the condition of the handles.
木製ドアハンドル_メンテナンス_写真2 すがたかたち

 
3. Gently polish the handles following the grain of the wood.
木製ドアハンドル_メンテナンス_写真3 すがたかたち

 
4. Wipe off the dirt and check the cleaned handle out.
木製ドアハンドル_メンテナンス_写真4 すがたかたち

 
5. Put a bit of oil on the cotton cloth and gently coat the handle with it.
木製ドアハンドル_メンテナンス_写真5 すがたかたち

 
6. It is now right like the original one ! Let it dry half a day and the process is then over.
木製ドアハンドル_メンテナンス_写真6 すがたかたち

Five-year quality guarantee

 

Our all products are guaranteed for five years.

Video - How to mounting pull handles

Back to Back Pair (Fixing on both sides of the door)

Contents of the pack

Outdoor handle : 1
Indoor handle : 1
Grub screw M4×10:4
Screw M5×40~90:2
Collar : 2
※ Collars and grub screws are set on the handle at the time of shipment.

Instructions

1. After you have decided where to fix the handles, drill two Φ6mm holes.
2. Fix the outdoor handle with the collars by the screws from the indoor side.
3. Assemble the indoor handle with the collars.
4. Using a hex key 2.0, fix the grub screws into the handle.

Single Bolt Through (Mounting of the one side)

 

Contents of the pack

Handle:1
Screw M5:2

Instructions

1. After you have decided where to fix the handle, drill two Φ6mm holes.
2. Fix the door handle to the door with the screws.
※ For a better finish, hide the screws heads with the tiny wooden caps.

Single Face Fix (Mounting of the handrail)

Contents of the pack

Handle:1
Grub screw M4:4
Vis M5:2
Collar:2
※ Collars and Grub screws are set on the handle at the time of shipment.

Instructions

1. After you have decided where to fix the handle, drill two Φ3mm holes.
2. Fix the collars with the wood screw.
3. Install the handle on the collars.
4. Using a hex key 2.0, fix the grub screws into the handle.
※ Please make sure have sufficiently strong wall base under plaster board.

Lever Handles mounting instructions

 

*By adjusting the screw, the thickness of the door on which the lever handle is attached can be adjusted from 30mm to 60mm.
*Internal lock mechanism is not included.
 Please prepare a matching mechanism with 8mm square metal rod for use.